General specifications | |
---|---|
Detection type | photoelectric sampling |
Device type | Incremental rotary encoder |
Pulse count | max. 5000 |
Functional safety related parameters | |
MTTFd | 140 a |
Mission Time (TM) | 20 a |
L10 | 1.6 E+9 at 3000 rpm |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications | |
Operating voltage | 10 ... 30 VИли отправьте нам запрос наutput circuit" in the ordering information) |
No-load supply current | max. 60 mA |
Output | |
Output type | push-pull, incremental or RS422, incremental (see "Output circuit" in the ordering information) |
Voltage drop | < 4 V (push-pull, incremental) |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS422, incremental) |
Output frequency | max. 200 kHz |
Rise time | 250 ns |
Phase position A to B | 90 ° ± 18 ° |
Duty cycle | 1/2 ± 20 % |
De-energized delay | 250 ns |
Connection | |
Cable | &Empty; 10.2 mm, Radox 9 x 0.5 mm2 |
Standard conformity | |
Degree of protection | DINEN60529, IP66 DINEN60529, IP67 |
Climatic testing | DINEN60068-2-78 , no moisture condensation |
Emitted interference | EN61000-6-4:2007/A1:2011 |
Noise immunity | EN61000-6-2:2005 |
Shock resistance | DINEN60068-2-27, 100g, 3ms |
Vibration resistance | DINEN60068-2-6, 10g, 10...2000Hz |
Ambient conditions | |
Operating temperature | |
Storage temperature | |
Mechanical specifications | |
Material | |
Mass | approx. 1300 g (combination 1) approx. 2300 g (combination 2) |
Rotational speed | max. 6000 min -1 |
Moment of inertia | 400 gcm2 |
Starting torque | < 5 Ncm |
Shaft load | |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | ZELM 14 ATEX 0519 X IECEx ZLM 14.0003X |
Directive conformity |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |